Home » Products » Kit 02 – Offset Galvanised Steel Handrail – Any angle – Handrail into the upright

Kit 02 – Offset Galvanised Steel Handrail – Any angle – Handrail into the upright

This kit provides a neat way to achieve a smooth offset (80mm) handrail to a stepped or flat area for access. The internal swivel allows the Elbow fitting to rotate to any angle that the handrail may need to be before final setting locks the elbow into place with an Allen key. The handrail starts & finishes directly at the posts and is selected quite often for its neat look. If the user needs to hold the rail for stability it is worth considering setting it a bit further out to allow them to hold it on accessing the area. The end of the uprights are capped with a plastic plug to give a neat finish.
The uprights are secured by selecting the most suitable method from our “Top Fix”, “Side Fix” or “Cast in” solutions. Where using cast in or top fix it is essential to add the extra length of tubing you will need above the ground for dimension A (approx 200mm), to give the desired handrail height.

Our kits come with the correct fixings to suit the material you are connecting to so you have everything to secure the handrail.

Because of the style of this handrail we cannot manufacture it with more than 2 uprights, as such we cannot make it any longer than 1.6 metres. please have a look at our other kits for longer handrails.

Please enter all dimensions in Millimetres. (25.4mm = 1 inch).

Dimension A (Length) in mm *

Calculate

Kit 02 - Offset Galvanised Steel Handrail - Any angle – Handrail into the upright quantity

Add to basket

£15.59